Datasheet4U Logo Datasheet4U.com

TDA4864AJ - Vertical deflection booster

General Description

The TDA4864J and TDA4864AJ are deflection boosters for use in vertical deflection systems for frame frequencies up to 200 Hz.

The TDA4864J needs a separate flyback supply voltage, so the supply voltages are independently adjustable to optimize power consumption and flyback time.

Key Features

  • s Power amplifier with differential inputs s Output current up to 2.5 A (p-p) s High vertical deflection frequency up to 200 Hz s High linear sawtooth signal amplification s Flyback generator: x TDA4864J: separate adjustable flyback supply voltage up to 60 V x TDA4864AJ: internally doubled supply voltage (two supply voltages only for DC-coupled outputs). 3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA4860 Vertical deflection power amplifier NXP
TDA4861 Vertical deflection power amplifier NXP
TDA4862 Power-Factor Controller Siemens Semiconductor
TDA4862 Power-Factor Controller (PFC) IC Infineon
TDA4863 Boost Controller Infineon Technologies

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
TDA4864J Vertical deflection booster
TDA4250B PROGRAMMABLE OPERATIONAL AMPLIFIER
TDA4250D PROGRAMMABLE OPERATIONAL AMPLIFIER
TDA4568 Luminance signal delay circuit
TDA0301D OPERATIONAL AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TDA4864J; TDA4864AJ Vertical deflection booster Rev. 01 — 12 August 2004 Product data sheet 1. General description The TDA4864J and TDA4864AJ are deflection boosters for use in vertical deflection systems for frame frequencies up to 200 Hz. The TDA4864J needs a separate flyback supply voltage, so the supply voltages are independently adjustable to optimize power consumption and flyback time. For the TDA4864AJ the flyback supply voltage will be generated internally by doubling the supply voltage and therefore a separate flyback supply voltage is not needed. Both circuits provide differential input stages. 2. Features s Power amplifier with differential inputs s Output current up to 2.