Datasheet4U Logo Datasheet4U.com

TDA8588BJ - Power Amplifier and Multiple Voltage Regulator

Download the TDA8588BJ datasheet PDF. This datasheet also covers the TDA8588J variant, as both devices belong to the same power amplifier and multiple voltage regulator family and are provided as variant models within a single manufacturer datasheet.

General Description

Amplifiers The TDA8588 has a complementary quad audio power amplifier that uses BCDMOS technology.

It contains four amplifiers configured in Bridge Tied Load (BTL) to drive speakers for front and rear left and right channels.

Key Features

  • Amplifiers.
  • I2C-bus control.
  • Can drive a 2 Ω load with a battery voltage of up to 16 V and a 4 Ω load with a battery voltage of up to 18 V.
  • DC load detection, open, short and present.
  • AC load (tweeter) detection.
  • Programmable clip detect; 1 % or 4 %.
  • Programmable thermal protection pre-warning.
  • Independent short-circuit protection per channel.
  • Low gain line driver mode (20 dB).
  • Loss-of-ground and open VP safe.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TDA8588J_Philips.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8580 Multi-purpose power amplifier NXP
TDA8580J Multi-purpose power amplifier NXP
TDA8581 Multi-purpose high-gain power amplifier NXP
TDA8586 Power amplifier with load detection and auto BTL/SE selection NXP
TDA8587J 4 x 25 W BTL power amplifier NXP

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
TDA8588AJ Power Amplifier and Multiple Voltage Regulator
TDA8588J Power Amplifier and Multiple Voltage Regulator
TDA8589BJ I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator
TDA8559T Low-voltage stereo headphone amplifier
TDA8577 Dual common-mode rejection differential line receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8588J; TDA8588xJ I2C-bus controlled 4 × 50 Watt power amplifier and multiple voltage regulator Product specification 2004 Feb 24 Philips Semiconductors Product specification I2C-bus controlled 4 × 50 Watt power amplifier and multiple voltage regulator FEATURES Amplifiers • I2C-bus control • Can drive a 2 Ω load with a battery voltage of up to 16 V and a 4 Ω load with a battery voltage of up to 18 V • DC load detection, open, short and present • AC load (tweeter) detection • Programmable clip detect; 1 % or 4 % • Programmable thermal protection pre-warning • Independent short-circuit protection per channel • Low gain line driver mode (20 dB) • Loss-of-ground and open VP safe • All outputs protected from short-circuit to ground, to VP or across the load • A