TDA8946AJ Datasheet 2 X 15 W Btl Audio Amplifier

Manufacturer: Philips Semiconductors (now NXP Semiconductors)

Overview: TDA8946AJ 2 x 15 W BTL audio ampliﬁer with DC gain control Rev. 01 — 01 March 2002 M3D541 Product data 1.

Datasheet Details

Part number	TDA8946AJ
Manufacturer	Philips Semiconductors (now NXP Semiconductors)
File Size	136.79 KB
Description	2 x 15 W BTL audio amplifier
Datasheet	TDA8946AJ-Philips.pdf

The TDA8946AJ is a dual-channel audio power ampliﬁer with DC gain control.

It has an output power of 2 × 15 W at an 8 Ω load and an 18 V supply.

The circuit contains two Bridge-Tied Load (BTL) ampliﬁers with an all-NPN output stage and standby/mute logic.

s Gain/volume adjustment via a DC control pin s Soft clipping s Operating at a low supply voltage s Standby and mute mode s No on/off switching plops s Low standby current s High supply voltage ripple rejection s Outputs short-circuit protected to ground, supply and across the load s Thermally protected s Printed-circuit board compatible with TDA8944AJ and TDA8580J. 3.

Brand Logo	Part Number	Description	Manufacturer
	TDA8946J	2 x 15 W stereo Bridge Tied Load BTL audio amplifier	NXP

Part Number	Description
TDA8944AJ	2 x 7 W BTL audio amplifier
TDA8920TH	Class-D audio amplifier 2 x 80W Single chip
TDA8921TH	Class-D audio amplifier 2 x 50W single chip
TDA8060ATS	Satellite ZERO-IF QPSK down-converter
TDA8559T	Low-voltage stereo headphone amplifier
TDA8577	Dual common-mode rejection differential line receiver
TDA8588AJ	Power Amplifier and Multiple Voltage Regulator
TDA8588BJ	Power Amplifier and Multiple Voltage Regulator
TDA8588J	Power Amplifier and Multiple Voltage Regulator
TDA8589BJ	I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator