Datasheet4U Logo Datasheet4U.com

UBA2013T - HB driver IC

Download the UBA2013T datasheet PDF. This datasheet also covers the UBA2013 variant, as both devices belong to the same hb driver ic family and are provided as variant models within a single manufacturer datasheet.

General Description

The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps.

The IC can handle both cold and warm ignition of the lamp.

Key Features

  • 2.1 Half bridge.
  • Suitable for cold and warm ignition Adjustable preheat time Adjustable ignition voltage Integrated bootstrap function Protection for lamp failure and end-of-life.
  • Adjustable preheat current Single ignition attempt Automatic restart after relamping Protection for capacitive mode 2.2 PFC.
  • Three pin PFC controller using TON control.
  • Critical mode operation.
  • Overvoltag.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (UBA2013_Philips.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
UBA2014 600V driver IC NXP
UBA2015 (UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver NXP Semiconductors
UBA2015A (UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver NXP Semiconductors
UBA2016A (UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver NXP Semiconductors
UBA2017 600V fluorescent lamp driver NXP

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
UBA2013 HB driver IC
UBA2013L HB driver IC
UBA2021 630V driver IC
UBA2035TS HF Full-bridge control IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UBA2013/L3 HB driver IC with PFC for fluorescent rings Rev. 00.01 — 23 February 2007 Preliminary data sheet 1. General description The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps. The IC can handle both cold and warm ignition of the lamp. It contains a TON-controlled PFC function, a half bridge controller circuit with level shifter and an internal bootstrap diode to drive an external half bridge. UBA2013/L3 also offers a functionality to properly handle fault conditions such as capacitive mode switching, end-of-lamp-life and overcurrent. UBA2013/L3 is designed for wide-input mains voltage (120 V - 277 V) applications. 2. Features 2.