PAW3602DH-NF
PAW3602DH-NF is CMOS LASER MOUSE SENSOR manufactured by PixArt.
Description
PAW3602DH-NF is a CMOS laser mouse sensor with DSP integration chip that serves as a non-mechanical motion estimation engine for implementing a puter mouse.
Features
Single power supply Precise laser motion estimation technology plete 2-D motion sensor
Key Specification
Power Supply
4.25V ~ 5.5V (VDD) 3.0V~3.6V (VDDD, VDDA)
No mechanical parts
System Clock 27 MHz
Accurate motion estimation over most of surfaces
Speed
28+ inches/sec
High speed motion detection up to 28 inches/sec and acceleration can be up to 20g Acceleration 20g
High resolution up to 1600cpi
Resolution 800/1600cpi
Power down pin and register setting for low power dissipation
Frame Rate 6600 frames/sec
Power saving mode during times of no movement
Operating 17 m A @Mouse moving (Normal)
Serial Interface for programming and data Current
5 m A @Mouse not moving (Sleep) transfer
(Sensor + LD) 200 u A @Shutdown mode
Low power for wireless application Eye safety protection circuit
Package
Shrunk DIP20
Ordering Information
Order number I/O PAW3602DH-NF CMOS output
Resolution 800/1600 cpi
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
Pix Art Imaging Inc. E-mail: fae_service@pixart..tw
V1.0, Jun. 2007
Pix Art Imaging Inc.
1. Pin Description
Pin No. Name 1 LD_P 2 LD_N 3 OSCOUT 4 OSCIN 5 VDDD 6 VSSD 7 VSSA 8 VDD 9 VDDA 10 LDRES 11 YA 12 YB 13 XA 14 XB
15 CPI
16 LDTEST
17 NC 18 SCLK 19 SDIO 20 PD
Type
PWR PWR OUT IN PWR GND GND PWR PWR IN I/O I/O I/O...
