PT1102 Datasheet | PowTech

Step-down DC-DC Converter GENERAL DESCRIPTION The PT1102 is a CMOS-based fixed frequency step-down DC/DC converter with a built-in internal power MOSFET. It achieves 1A continuous output current over a wide input supply range with excellent load and line regulation. It requires a minimum number of readily available external ponents to plete a 1A step down DC to DC converter solution with low ripple and high efficiency. The output voltage can be adjusted with external resisters. With the enhanced voltage mode operation, the PT1102 achieves good loop stability with wide operating range. Under light load conditions, the PT1102 automatically switches to a VFM mode to improve efficiency. Fault condition protection includes current limiting and thermal shutdown. Furthermore, the PT1102 has a built-in UVLO function that prevents the output from being unstable when the input voltage bees too low. The PT1102 is available in SOP8 packages. Features z z z z z z z z APPLICATIONS z z z Distributed Power Systems Battery Chargers Pre-regulator for linear Regulators Wide Range Of Input Voltage: 2.5V~18V Oscillation Frequency: 500k Hz Standby Current: Typical 0.1µA High Efficiency: Typical 88% Low Temp. Coefficient of Feedback Voltage: Typical ±100ppm/℃ Built-in Soft-start and UVLO Thermal Shutdown Package: SOP-8 TYPICAL APPLICATION CIRCUIT KEY PERFORMANCE CHART Efficiency vs. Output Current 100 90 80 Efficiency (%) 70 60 50 40 30 20 L: CR105-270MC (Sumida, 27µH) or Equivalent SD: RB063L-30(Rohm) or Equivalent C1: 4.7µF, Ceramic Type R1: 10kΩ R2: 40kΩ (For 5V Output) C2: 1n F, Ceramic Type C3: 47µF, Tantalum Type 10 0 Vin=6.5V, Vout=3.3V Vin=10V, Vout=6V Vin=15V, Vout=9V Output Current (m A) ORDERING INFORMATION Package SOP8 Temperature -40℃ to 85℃ Part Number PT1102ESOH Transport Media Tape and Reel China Resources Powtech (Shanghai) Limited PT1102_DS Rev EN_1.1 .CRPOWTECH. Page 1 Step-down DC-DC Converter PACKAGES PIN...