Datasheet4U Logo Datasheet4U.com

PAM2701 - 4-Channel Regulated Charge Pump White LED Driver

General Description

The PAM2701 is a 4-channel charge pump white LED driver, capable of driving up to 4 LEDs in parallel.

The device operates in either 1x mode or 1.5x fractional mode, and it can switch from 1x mode to 1.5x mode automatically when the input voltage decreased.

Key Features

  • n n n n n n n n n n n.

📥 Download Datasheet

Datasheet Details

Part number PAM2701
Manufacturer Power Analog Micoelectronics
File Size 423.66 KB
Description 4-Channel Regulated Charge Pump White LED Driver
Datasheet download datasheet PAM2701 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PAM2301 800mA STEP-DOWN DC-DC CONVERTER Diodes
PAM2303 3A STEP-DOWN DC-DC CONVERTER Diodes
PAM2304 1A STEP-DOWN DC-DC CONVERTER Diodes
PAM2305 1A STEP-DOWN DC-DC CONVERTER Diodes
PAM2305D 1A STEP-DOWN DC-DC CONVERTER Diodes

Other Datasheets by Power Analog Micoelectronics

Part Number Description
PAM2301 800mA Step-Down DC-DC Converters
PAM2305 1A Step-Down DC-DC Converters
PAM2306 Dual High-Efficiency PWM Step-Down DC-DC Coverter
PAM2308 Dual High-Efficiency PWM Step-Down DC-DC Coverter
PAM2400 3-Pin Synchronous Step-Up DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PAM2701 4-Channel Regulated Charge Pump White LED Driver Features n n n n n n n n n n n Description The PAM2701 is a 4-channel charge pump white LED driver, capable of driving up to 4 LEDs in parallel. The device operates in either 1x mode or 1.5x fractional mode, and it can switch from 1x mode to 1.5x mode automatically when the input voltage decreased. Its internal 4 current sink regulators ensure both the LED current matching and the brightness uniformity. The LED current can be programmed by an external resistor, R SET, connected between the RSET pin and ground. LED current of up to 30mA are supported by the input supply voltage over a range of 2.7V to 5.5V, making the device optimized for Li-Ion battery applications.