INN3475C Datasheet | Power Integrations

Features - Primary sensed output OVP - Open SR FET gate detection - Hysteretic thermal shutdown - Input voltage monitor with accurate brown-in/brown-out and overvoltage protection Full Safety and Regulatory pliance - Reinforced insulation - Isolation voltage >4000 VAC - 100% production HIPOT pliance testing - UL1577 and TUV (EN60950) safety approved - Enables designs that have “A” performance criteria for EN61000-4 suite of test standards, including EN61000-4-2, 4-3 (30 V/m), 4-4, 4-5, 4-6, 4-8 (100 A/m) and 4-9 (1000 A/m) Green Package - Halogen free and Ro HS pliant Applications - Use with Inno Mux for Energy Star 8, CEC, and 2021/2023 EU labeling for monitors and TVs Description The Inno Switch™3-MX together with Inno Mux dramatically improves system efficiency by eliminating the boost and buck converter stages. It also simplifies the development and manufacturing of multiple output power supplies, particularly those in pact enclosures or with high efficiency requirements. The Inno Switch3-MX architecture is revolutionary in that the devices incorporate both primary and secondary controllers, with sense elements and a safety-rated feedback mechanism into a single IC. Close ponent proximity and innovative use of the integrated munication link, Flux Link, permit accurate control of a secondaryside synchronous rectification MOSFET with Quasi-Resonant switching of primary integrated high-voltage switch to maintain high efficiency across the entire load range. This version of Inno Switch3 is intended to be used with Inno Mux for multiple output, single-stage power supplies for monitors and TVs. This enables very high system efficiency on a small PCB foot print. VLED VOUT2 D Inno Switch3-MX Primary FET and Controller V BPP Secondary Control IC Figure 1. Typical Application/Performance. FW SR GND VOUT BPS VOUT1 RTN VCV1 SR FWC REQ ACK Interface with Inno Mux PI-8368c-030920 Figure 2. High Creepage, Safety-pliant In SOP-24D Package. Wave Solder or Reflow...