PFS7323 Datasheet | Power Integrations

PFS7323-7329 Hiper PFS-2 Family ™ High Power PFC Controller with Integrated High-Voltage MOSFET and Qspeed™ Diode Key Benefits - Output Power Table e SIP-16 Package Maximum Continuous Output Power Rating at 90 VAC (in Full Mode) 110 W 130 W 185 W 230 W 290 W 350 W 380 W Peak Output Power Rating Full Mode (R = 24.9 k W) 120 W 150 W 205 W 260 W 320 W 385 W 425 W - - - - - Highly integrated for smallest boost PFC form factor Integrated controller and MOSFET in all package options - Ultra-low reverse recovery loss diode (Qspeed) included in extended e SIP™ package option - Lossless internal current sense reduces ponent count and system losses - EN61000-3-2 Class C and D pliant Packaging optimized for high volume production - Exposed pad connected to GROUND pin (Cool PAD) - Eliminates insulating pad/heat-spreader Enhanced Features - Programmable power good (PG) signal - User selectable power limit: Enables device swapping in a given design to optimize efficiency/cost - Integrated non-linear amplifier for fast output OV and UV protection High efficiency and power factor across load range - >95% efficiency from 10% load to full load - <200 m W no-load consumption at 230 VAC in remote off-state - Light load PF >0.9 at 20% load on optimized designs >200 W - PF >0.95 at 50% load - Enables 80+ Platinum designs Frequency adjusted over line voltage and each line cycle - Spread-spectrum across >60 k Hz window simplifies EMI filtering requirements - Lower boost inductance Provides up to 425 W peak output power - >425 W peak power in power limit voltage regulation mode - Product PFS7323L PFS7324L PFS7325L PFS7326H PFS7327H PFS7328H PFS7329H Table 1. Output Power Table (See Table 2 on page 11 for Maximum Continuous Output Power Ratings.) - - Protection Features include: UV, OV, OTP, brown-in/out, cycle-by-cycle current limit and power limiting for overload protection Halogen free and Ro HS...