SC0163D Datasheet | Power Integrations

SC0163D Chi Phy™ Family Charger Interface Physical Layer IC PRELIMINARY Product Highlights - Supports Quick Charge 2.0 Class A specification - 5 V, 9 V, and 12 V output voltage - Supports Quick Charge 3.0 Class A specification - 3.6 V to 12 V output voltage - USB battery charging specification revision 1.2 patible - Automatic USB DCP shorting D+ to D- line - Default 5 V mode operation - Very low power consumption - Below 1 m W at 5 V output - Fail safe operation - Adjacent pin-to-pin short-circuit fault - Open-circuit pin fault - Supports Inno Switch, Tiny Switch and TOPSwitch Typical Applications - Battery chargers for smart phones, tablets, netbooks, digital cameras, and bluetooth accessories - USB power output ports such as battery banks or car chargers Feedback Network D+ SC0163 DU1 Description SC0163D is a low-cost USB high-voltage dedicated charging port (HVDCP) interface IC for the Quick Charge 3.0 specification. It incorporates all necessary functions to add Quick Charge 3.0 capability to Power Integrations’ switcher ICs such as Inno Switch, Tiny Switch, TOPSwitch and other solutions employing traditional secondary-side feedback schemes. Figure 1. Typical Application Schematic. SC0163D supports the full output voltage range of Class A per Quick Charge 3.0 specification. SC0163D automatically detects whether a connected (PD) is Quick Charge 3.0 or Quick Charge 2.0 capable before enabling output voltage FP6600Q CHY103D SC0163D adjustment. If a PD not pliant to Quick Charge 2.0 or 3.0 is detected the SC0163D disables output voltage adjustment to ensure safe operation with legacy 5 V only USB...