FEC30 Datasheet | Power Mate Technology

features 1600VDC of isolation, short-circuit and over-voltage protection,as well as six sided shielding. A safety approval to EN60950-1 and UL60950-1. All models are particularly suited to telemunications, industrial, mobile tele and test equipment applications. UL E193009 TUV CB CE MARK T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Voltage adjustability Minimum load Line regulation Load regulation LL to HL at Full Load 10% to 100% FL All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS 30 Watts max Efficiency See table Input to Output Input (Output) to Case 1600VDC, min 10 ohms, min 1000p F, max 300KHz, typ IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 2.00 X 1.60 X 0.40 Inch (50.8 X 40.6 X 10.2 mm) Full load and nominal Vin Single/Dual Single/Dual Single Dual Single Dual Cross regulation (Dual) Asymmetrical load 25% / 100% FL 20MHz bandwidth Ripple and noise (Measured with a 104p F/50V MLCC) Temperature coefficient Transient response recovery time 1.5V output 1.8V output 2.5V output Over voltage protection 3.3V output Zener diode clamp 5V output 12V output 15V output Over load protection Short circuit protection % of FL at nominal input 25% load step change ± 1% Isolation voltage ± 10% Isolation resistance 0% Isolation capacitance ± 0.2% ± 0.5％ Switching frequency ± 0.5% Approvals and standard ± 1% ± 5% Case material See table Base material ±0.02% / ºC, max Potting material 300u S Dimensions 3.9V Weight 48g (1.69oz) 3.9V 6 3.9V MTBF (Note 3) 1.535 x 10 hrs 3.9V 6.2V ENVIRONMENTAL SPECIFICATIONS 15V -40ºC ~ +85ºC (with derating) 18V Operating temperature range 150%,max Maximum case temperature 100ºC -55ºC ~ +105ºC 115ºC, typ Hiccup, automatics recovery Storage temperature range Over temperature protection INPUT SPECIFICATIONS Input voltage range 12V nominal input 24V nominal input 48V nominal input...