DU1P0-xxx Datasheet | Power Mate

- 1 WATT UNREGULATED OUTPUT POWER - SINGLE-IN-LINE PACKAGE (SIP) - HIGH EFFICIENCY FOR LOW POWER APPLICATION - UL 94-V0 NON-CONDUCTED CASE - INTERNAL INPUT & OUTPUT FILTER - INPUT / OUTPUT ISOLATION UP TO 3KVDC The DU1P0 series are the standard building blocks for on-board distributed power systems. They are ideally suited to providing single and dual supplies on primarily digital boards with added benefit of galvanic isolation to reduce switching noise. All of the rated power may be drawn from a single pin provided the total load does not exceed 1 watt. T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load (Note 1) Line regulation Load regulation Ripple and noise Temperature coefficient Short circuit protection LL to HL at Full Load 20% to 100% FL 20MHz bandwidth 5V output others Full load and nominal Vin All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS 1 Watt max ± 5% 10% of FL 1.3% / 1% of Vin Efficiency Isolation voltage Isolation resistance Input to Output Standard Suffix-N See table 1000VDC, min 3000VDC, min 10 ohms, min 30p F, max 60KHz, min UL1950, EN60950 Non-conductive black plastic None Epoxy (UL94-V0) 0.77 X 0.24 X 0.40 Inch (19.6 X 6.0 X 10.2 mm) 2.0g (0.071oz) 1.471 x 107 hrs Isolation capacitance ± 10% .. Switching frequency ± 8% Design meet safety standard Case material Base material Potting material 100m Vp-p I0.1% / ºC, max Short term INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 15V nominal input 24V nominal input 4.5 - 5.5VDC 10.8 - 13.2VDC 13.5 - 16.5VDC 21.6 - 26.4VDC Capacitor Dimensions Weight MTBF (Note 2) Input filter ENVIRONMENTAL SPECIFICATIONS Operating temperature range Storage temperature range Thermal shock Vibration Relative humidity -25ºC ~ +85ºC (with derating) -55ºC ~ +105ºC MIL-STD-810D 10~55Hz, 2G, 30minutes along X,Y and Z 5% to 95% RH Model Number DU1P0-05S05 DU1P0-05S12...