BLP40 Datasheet | Power-One

.. BLP40 AC-DC Series Data Sheet 40 Watts Features - Ro HS lead-free solder and lead-solder-exempted products are available - Industry-standard 3” x 5” footprint - Main output remote sense - CE marked to Low Voltage Directive (Pending) - pliance to EN61000-4-2/-3/-4/-5/-6/-8 Description The BLP40 Series’ economical and pact construction provides single or three-output ac-dc power conversion to meet the requirements of networking and data munications systems, as well as mercial and industrial configurations. The BLP40 is rated for convection, as well as forced-air cooling. Full output power is available with external forced-air cooling. Other Features include main-output remote sense and an internal EMI filter. Single Output Model Selection MODEL NOMINAL OUTPUT VOLTAGE (VDC) MIN-MAXIMUM OUTPUT CURRENT, CONVECTION MIN-MAXIMUM OUTPUT CURRENT 1 PEAK OUTPUT CURRENT 2 TOTAL REGULATION % 3 RIPPLE & NOISE %p-p 4 BLP40-1005 BLP40-1012 BLP40-1024 5V 12V 24V 0 to 5A 0 to 2.1A 0 to 1.1A 0 to 8A 0 to 3.3A 0 to 1.8A 9A 3.7A 1.9A ±2 ±2 ±2 1 1 1 Triple Output Model Selection MODEL NOMINAL OUTPUT VOLTAGE (VDC) MIN-MAXIMUM OUTPUT CURRENT, CONVECTION MIN-MAXIMUM OUTPUT CURRENT 1 PEAK OUTPUT CURRENT 2 TOTAL REGULATION % 3 RIPPLE & NOISE %p-p 4 BLP40-3000 BLP40-3003- +5V +12V -12V +5V +15V -15V 0.3 to 3A 0.1 to 1.5A 0.0 to 0.5A 0.3 to 3A 0.1 to 1.5A 0.0 to 0.5A 0.3 to 4A 0.1 to 2A 0.0 to 0.7A 0.3 to 4A 0.1 to 2A 0.0 to 0.7A 5A 3A 1 5A 2.5A 1A ±2 ±5 ±5 ±2 ±5 ±5 1 1 1 1 1 1 - Advanced Product Release NOTES: 1 10 CFM or 150 LFM (average measurement of six equally-distanced points through a 3.5” x 1.6” cross-sectional area) with power supply mounted on 0.25” standoffs. Remended airflow direction is from the AC side to the DC side. Peak current duration for less than 30 Sec with a maximum duty cycle of 10%. 3 At 25 °C ambient including voltage set point tolerance, line, and load regulation. 4 Maximum peak-to-peak noise expressed as a...