BWS0505 Datasheet | Power-One

DESCRIPTION BWS DC/DC converters offer excellent regulation and isolation in an industry-standard DIP package. The BWS is ideal for industrial, tele, and networking applications, and features short circuit protection, low profile, and 500 VDC isolation. Please see the BWD series for dual output applications. TECHNICAL SPECIFICATIONS Input Voltage Range 5 VDC Nominal 12 VDC Nominal Reflected Ripple Reverse Input Current 4.5 - 9 VDC 9 - 18 VDC 20% Iin Max. 100% Iin Max. FEATURES - Industry Standard DIP Package - Industry Standard Pinout - 85°C Case Operation - Short Circuit Protection - - - - Wide Range Inputs Input Pi Filter Regulated Outputs 500V Isolation Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., Vin Nom. Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Temperature Coefficient Ripple And Noise, 20 MHz BW Short Circuit Protection 1 Current Limit ±5% ±1.5% Vout ±2.5% Vout 10% Iout Rated 25% Iout 1% Vout 500 ms 0.02%/°C 150 m V Continuous 180% General Switching Frequency Isolation Input - Output Input - Case Output - Case Isolation Resistance - Input to Output Isolation Capacitance - Input to Output No Load Input Power Case Temperature Standard Operating Range Storage Range Humidity Max., Non-Condensing Vibration, 3 Axes, 5 Min Each Safety Weight (approx.) 200 k Hz 500 VDC 500 VDC 500 VDC 109 Ohms 80 p F 0.70 W -25 to +85°C -40 to +125°C 95% 5 g, 10 - 55 Hz UL, c UL, TUV 0.6 oz Notes 1 Continuous short circuit protection is provided. Long-term continuous operation in this mode is not remended. Converter will auto-restart once fault has been removed. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully patible with mercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. REV. 10/01 BWS...