IMS6 Datasheet | Power-One

Industrial Environment DC/DC Converters < 40W IMS6 Series 6 Watt SMD and through hole DC/DC converters Input to output electric strength test up to 2 k V DC Input voltage ranges: 18...36 and 36...75 V DC Single and dual outputs of 5, 12, 15 V DC - Wide input voltage ranges - Electrical isolation, single and dual outputs - Immunity to IEC/EN 61000-4-2, -3, -4, -5 and -6 - High efficiency (typ. 82%) - Flex power: flexible load distribution - No load and short-circuit proof - High reliability and no derating - Operating ambient temperature - 40...+ 71 o C - Industrial, alternative and SMD pinout - DIL 24 case with 9.0 mm profile Safety approvals pending to IEC/EN 60950, UL 1950 LGA IMS 6 Series Summary The IMS 6 series of board mountable 6 W DC-DC converters has been designed according to the latest industry requirements and standards. The converters are particularly suitable for use in mobile or stationary applications in transport, industry or telemunications where variable input voltages or high transient voltages are prevalent. Covering a total input voltage range from 18 V DC up to 75 V DC. The converters are designed and built according to the international safety standards IEC/EN 60950, UL 1950, CAN/CSA C22.2 No.950-95 and are LGA and UL marked. A special feature is their small case size, DIL 24 with only 9.0 mm profile. The circuit prises integrated planar magnetics and all ponents are automatically assembled and solidly soldered onto a single PCB without any wire connections. Thanks to the rigid mechanical design the units withstand an extremely high level of shock and vibrations. Careful considerations of possible thermal stresses ensure the absence of hot spots providing long life in environments where temperature cycles are a reality. The thermal design allows operation at full load up to an ambient temperature of 71 C in free air without using any potting material. Options : SMD pinout or K-pinout, an alternative to the standard industrial...