NET1-4112 Datasheet | Power-One

FEATURES - Currents Over 100 Amps - Fits 1U Chassis Height Constraints - No Minimum Load Requirement - Current Share Capabilities on All Outputs - Patented High-Efficiency Design - Meets European Power Factor Requirements for 2001 - Excellent Load Transient Response MULTIPLE OUTPUT MODEL SELECTION CHART - 240W WITH 300 LFM FORCED AIR COOLING MODEL OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT CURRENT (NOTE 1) LINE REGULATION LOAD REGULATION RIPPLE & NOISE %Pk-Pk (NOTE 2) INITIAL SETTING ACCURACY NET1-4325 NET1-4130 +3.3V +2.5V +5V +12V +1.8V +3.3V +5V +12V +1.8V +1.65V +5V +12V +0.5V +0.5V FIXED FIXED +0.5V +0.5V FIXED FIXED +0.5V +0.5V FIXED FIXED 50A 50A 5A 4A 50A 50A 5A 4A 50A 50A 5A 4A 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 1% 1% 3% 3% 1% 1% 3% 3% 1% 1% 3% 3% 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V 1% or 50m V ± 30m V ± 30m V ± 30m V ± 100m V ± 20m V ± 30m V ± 30m V ± 100m V ± 20m V ± 30m V ± 30m V ± 100m V NOTES: 1) Output currents ratings are expressed with 300 LFM forced air. 2) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. INPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN TYP MAX UNITS Input Voltage - AC Input Frequency Hold-up Time Input Current Input Protection Inrush Surge Current Power Factor Continuous input range. AC input. After last AC line peak at 240 watts. 85 VAC at full rated load. Non-user serviceable internally located AC input line fuse. Internally limited by thermistor. Vin = 220 VAC, one cycle, 25°C. Per EN61000-3-2. 85 47 20 4.0 264 63 VAC Hz m S ARMS APK W/VA 35 0.95 Rev. 11/2000 NET1 SERIES OUTPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION Advanced Produc t Release MIN TYP MAX UNITS Efficiency Ripple and Noise Output Power Overshoot / Undershoot Regulation Transient Response Turn-on Delay Turn-on Rise Time Full Rated Load, 110 VAC. Varies with distribution of loads...