PFC250-4530 Datasheet | Power-One

feature remote sense on outputs V1 and V2 to provide independent pensation of output cable losses. Other standard features include independent current sharing on V1 and V2, thermal shutdown, and remote inhibit. Airflow of 300 linear feet per minute (LFM) is required to deliver the full power density of 3.0 watts per cubic inch. The Per Forman Ce Power PFC250 meets international safety requirements and is CE Marked to the Low Voltage Directive. FEATURES - Active Power Factor Correction (PFC) Meets EN61000-3-2 - Dual Main Outputs Provide 3.3V and 5V for Mixed Mode Applications - Single Wire Current Sense on Outputs V1 and V2 - Remote Sense on Outputs V1 and V2 - Overtemperature, Overload, and Overvoltage Protection - Available with Metric or SAE Mountings - Isolated V3 and V4 can be Used as Positive or Negative Outputs - Greater than 200,000 Hours MTBF SINGLE OUTPUT MODEL SELECTION CHART MODEL OUTPUT VOLTAGE ADJUSTMENT RANGE MAXIMUM OUTPUT CURRENT (NOTE 1) LINE REGULATION LOAD REGULATION RIPPLE & NOISE %p-p (NOTE 2) INITIAL SETTING ACCURACY PFC250-1003 PFC250-1005 PFC250-1012 PFC250-1015 PFC250-1024 PFC250-1048 NOTES: 3.3V 5V 12V 15V 24V 48V 3.15V to 3.45V 4.5V to 5.5V 10.8V to 13.5V 13.5V to 18.3V 21.6V to 26.4V 46.0V to 56.0V 50A 50A 23A 18.3A 10.5A 6A 0.5% 0.5% 0.5% 0.2% 0.5% 0.5% 0.8% 0.8% 0.8% 1.0% 0.8% 1.0% 1% 1% 1% 1% 1% 1% 3.28V to 3.32V 4.98V to 5.02V 11.94V to 12.06V 14.92V to 15.08V 23.88V to 24.12V 47.52V to 48.48V 1) Output currents ratings are expressed with 300 LFM forced air. 2) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. MULTIPLE OUTPUT MODEL SELECTION CHART - MODEL OUTPUT VOLTAGE ADJUSTMENT RANGE 250W WITH 300 LFM FORCED-AIR COOLING ISOLATED V3 AND V4 CAN BE USED AS POSITIVE OR NEGATIVE OUTPUTS LINE REGULATION LOAD REGULATION RIPPLE & NOISE %p-p (NOTE 1) INITIAL SETTING ACCURACY OUTPUT CURRENT PFC250-4000 (Note 2) PFC250-4001 (Note 2) PFC250-4004 (Note 3) PFC250-4350 (Note 2) PFC250-4530...