Power One QLS30ZB
The QLS30ZB model converter can deliver 22.8 amperes at 1.8 volt output in ambient conditions of 65°C and 200 LFM. This full featured, low profile converter offers input undervoltage lockout, overload, overvoltage and overtemperature protection.- Min Voltage : 36V
- Max Voltage : 75V
- Max Operating Temp : 100°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | QLS30ZB |
|---|---|
| Datasheet | QLS30ZB Download |
| Manufacturer |  Power One |
| Description | 30A Quarter-Brick DC/DC Converter |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
●
●
●
●
● Cost-effective single board design Low profile – 11 mm height Input/output isolation: 1500VDC, basic insulation High efficiency Output back-drive protection Start-up into high capacitive load Low conducted and radiated EMI Output overcurrent protection Output overvoltage protection Overtemperature protection Remote sense Set point accuracy ± 1% Remote on/off (primary referenced), positive or negative logic Output voltage trim adjust, positive or negative UL 1950 Recognition, CSA 22.2 No. 950-95 certification, TUV IEC950
APPLICATIONS
●●
●
● Distributed power architectures Telecommunications equipment LAN/WAN applications Data processing applications
DESCRIPTION
The new QLS30 series of single-output DC/DC converters features single board, multi-layer construction and an SMT design that is highly reliable due to the low component count and minimal manufacturing touch time. The QLS30 series uses fewer components than any other equivalently rated single board converter.
