ZY1015 Datasheet | Power-One

Features - Ro HS lead free and lead-solder-exempt products are available - Wide input voltage range: 3V- 14V - High continuous output current: 15A - Wide programmable output voltage range: 0.5V- 5.5V - Active digital current share - Output voltage margining - Overcurrent and overtemperature protections - Overvoltage and undervoltage protections, and Power Good signal tracking the output voltage setpoint - Programmable power-up delay - Tracking during turn-on and turn-off with guaranteed slew rates - Sequenced and cascaded modes of operation - Single-wire line for frequency synchronization between multiple POLs - Programmable interleave - Programmable feedback loop pensation - Enable control with programmable polarity - Flexible fault management and propagation - Start-up into the load pre-biased up to 100% - Full rated current sink - Real time current and temperature measurements, monitoring, and reporting - Small footprint SMT package: 16x32mm - Low profile of 8mm - patible with conventional pick-and-place equipment - Wide operating temperature range - UL60950 recognized, CSA C22.2 No. 60950-00 certified, and TUV EN60950-1:2001 certified Description The ZY1015 is an intelligent, fully programmable step-down point-of-load DC-DC module integrating digital power conversion and intelligent power management. The ZY1015 pletely eliminates the need for external ponents for sequencing, tracking, protection, monitoring, and reporting. Performance parameters of the ZY1015 are programmable by pin strapping and external resistor and capacitor and can be changed by a user at any time during product development and service without a need for a munication bus. REV. 1.2 MAR 14, 2007 .power-one. Page 1 of 17 ZY1015 15A No-Bus POL Data Sheet 3V to 14V Input - 0.5V to 5.5V Output Reference Documents No-Bus TM POL Converters. Z-1000 Series Application Note Z-One® POL Converters. Eutectic Solder Process Application Note Z-One® POL Converters. Lead-Free Process Application Note 1....