PESDNC2FD12VU
PESDNC2FD12VU is Uni-directional 12V Normal Capacitance ESD Protector manufactured by Prisemi.
Description
The PESDNC2FD12VU ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook puters, and PDA’s. They feature large cross-sectional area junctions for conducting high transient currents, offer desirable electrical characteristics for board level protection, such as fast response time, lower operating voltage, lower clamping voltage and no device degradation when pared to MLVs. The PESDNC2FD12VU protects sensitive semiconductor ponents from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. The PESDNC2FD12VU is available in a DFN1006-2L package with working voltages of 12 volt. It gives designer the flexibility to protect one unidirectional line in applications where arrays are not practical. Additionally, it may be “sprinkled” around the board in applications where board space is at a premium.
Feature
- 80W peak pulse power per line (t P = 8/20μs)
- DFN1006-2L package
- Replacement for MLV(0402)
- Unidirectional configurations
- Response Time is Typically < 1 ns
- Protect one I/O or power line
- Low clamping voltage
- Ro HS pliant
- Transient protection for data lines to IEC 61000-4-2(ESD) ±30KV(air),
±30KV(contact); IEC 61000-4-4 (EFT) 40A (5/50ns)
Mechanical Characteristics
- Mounting position: Any
- Qualified max reflow temperature:260℃
- Device meets MSL 1 requirements
- DFN1006-2L without plating
DFN1006-2L(Bottom View)
Pin 1
Pin 2
Circuit Diagram
Marking (Top View)
Applications
- Cell phone handsets and accessories
- Personal digital assistants (PDA’s)
- Notebooks, desktops, and servers
- Portable instrumentation
- Cordless phones
- Digital cameras
- Peripherals
- MP3 players
Rev.06.3
.prisemi.
ESD Protector
Electronics Parameter
Symbol
VRWM IR VBR IT IPP VC PPP CJ IF...
