420LE60 Datasheet | ProTek Devices

05048 Only One Name Means ProTek’Tion™ TWO LINE PAIR 4-20mA CONTROL LOOP PROTECTOR 420LB28 - 420LE60 420LB Description The 420LE/B series is a two stage transient voltage protector providing primary and secondary protection against lightning, inductive switching and electrostatic discharge (ESD) transient threats. The first stage diverts the transient current through the ground terminal return path and the second stage clamps the voltage to a safe level without interruption of service. The 420LE/B series is designed to protect data lines from differential (line to line) and mon mode (line to ground) transients. Terminals 1 and 2, 3 and 4 for the 420LE and pins 2 and 3, 4, and 5 for the 420LB are designated as line pairs. Each line pair is referenced to ground. A transient voltage suppressor is connected across each line pair for differential mode protection. Each line pair is referenced to ground. This product can also be used on telephone, signal/data lines, security, timing and control interface circuits. For most applications, the product should be located as close as possible to the equipment being protected. A low impedance grounding system is important to maintain a low voltage clamp between the line-to-ground connection. 420LE Features - patible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV - patible with IEC 61000-4-4 (EFT): 40A - 5/50ns - patible with IEC 61000-4-5 (Surge): 95A, 8/20µs, Level 4 (Line- Gnd) & 48A, Level 4 (Line-Line) - Designed for 4-20mA Current Loops - Automatic Reset - Does Not Interrupt Service - Permanent Two-Stage Line Pair Protection - mon Mode & Differential Mode Protection - Subnanosecond Response Time - Effective Against Lightning, Inductive Switching and ESD Mechanical characteristics - Approximate Weight:...