PLW0501D
PLW0501D is STANDARD CAPACITANCE TVS COMPONENT manufactured by Protek Devices.
FEATURES
✔ 150 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ ESD Protection > 25 kilovolts ✔ Cable Discharge Event (CDE) Protection ✔ Unidirectional Configuration ✔ Provides One Line of Protection ✔ Ro HS pliant
MECHANICAL CHARACTERISTICS
✔ ✔ ✔ ✔ Molded DFN-2 Package Weight 0.8 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin
- Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Polarity Band
PIN CONFIGURATION
05263.R2 2/1/07
.protekdevices.
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs)
- See Figure 1 Peak Pulse Current (tp = 8/20µ) Soldering Temperature for 10 seconds Typical Forward Voltage @10m A
SYMBOL
TA TSTG PPP IPP TL VF
VALUE
-55 to 150 -55 to 150 150 10 265 0.8
UNITS
°C °C Watts A °C V
ELECTRICAL CHARACTERISTICS PER LINE
PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE
@ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) IP @ 1A VC VOLTS 9.8 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE
V WM VOLTS PLW0501D 4 5.0
@ 1m A V(BR) VOLTS 6.0
@VWM ID µA 1.0
@0V, 1 MHz C p F 70
Note 1: Measured between I/O pins and ground.
FIGURE 1 PEAK PULSE POWER VS PULSE TIME
10,000
- Peak Pulse Current
- % of IPP PPP
- Peak Pulse Current
- Watts
120 100 80 60 40 20 0 tf
FIGURE 2 PULSE WAVE FORM
Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td =...
