PA4349.302ANLT Datasheet | Pulse

SMT Power Inductor High Current Molded Power Inductor - PA4349.XXXANLT Series Part Number PA4349.152ANLT PA4349.202ANLT PA4349.222ANLT PA4349.302ANLT PA4349.332ANLT PA4349.472ANLT PA4349.682ANLT PA4349.103ANLT PA4349.223ANLT PA4349.233ANLT PA4349.333ANLT PA4349.473ANLT PA4349.683ANLT PA4349.753ANLT PA4349.823ANLT PA4349.104ANLT Height: 13.0mm Max Footprint: 24.0mm x 22.3mm Max Current Rating: up to 62.0A Inductance Range: 1.5u H to 100u H Shielded construction and pact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux Inductance 100KHz, 1V u H±20% 1.5 2.2 3.0 3.3 4.7 6.8 10.0 22.0 23.0 33.0 47.0 68.0 75.0 82.0 100 Electrical Specifications @ 25°C - Operating Temperature -55°C to +155°C Rated Current DC Resistance MAX. TYP. A mΩ 62.0 1.15 60.0 1.20 58.0 1.25 51.0 1.64 49.0 1.75 47.0 2.20 40.0 3.10 33.0 4.15 22.0 11.0 22.0 11.0 19.0 15.4 17.0 20.8 14.0 29.5 13.0 31.6 12.0 34.2 11.0 40.0 mΩ 1.00 1.05 1.42 1.50 1.90 2.70 3.80 9.20 9.20 13.5 17.3 26.2 27.5 31.0 36.0 Saturation Current Max. A 52.0 48.0 44.0 41.0 38.0 36.0 28.0 15.0 15.0 12.0 12.0 12.0 10.5 9.0 9.0 1 power.pulseelectronics. P821.D (04/18) http://.power.pulseelectronics./contact SMT Power Inductor High Current Molded Power Inductor - PA4349.XXXANLT Series Notes: 1. Actual temperature of the ponent during system operation (ambient plus tempera- 3. The rated current is the DC current required to raise the ponent temperature by ture rise) must be within the standard operating range. approximately 40- C. Take note that the ponents’ performanc varies depending on the 2. The saturation current is the current at which the initial inductance drops approxi- system condition. It is suggested that the ponent be tested at the system level, to mately 30% at the stated ambient temperature. This current is determined by placing verify the temperature rise of the ponent during system operation. the ponent in the...