PulseCore Semiconductor P1727
The P1727 modulates the output of a single PLL in order to “spread” the bandwidth of a synthesized clock, thereby decreasing the peak amplitudes of its harmonics. This result in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and most clock generators. The P1727 uses the most efficient and optimized modulation profile approved by the FCC and is implemented by using a proprietary all-digital method.| Part No. | P1727 |
|---|---|
| Datasheet | P1727 Download |
| Manufacturer | PulseCore Semiconductor |
| Description | Low Power Notebook LCD Panel EMI Reduction IC |
| Buy | Stock & Price |
FEATURES
● FCC approved method of EMI attenuation● Generates a low EMI spread spectrum of the input clock frequency
● Optimized for frequency range: P1727X: 20MHz to 40MHz
● Internal loop filter minimizes external components and board space
● 8 different frequency deviations ranging from +/-0.625% to –3.50%
● Low inherent Cycle-to-cycle jitter
● 3.3V Operating Voltage
● Supports notebook VGA and other LCD timing controller applications
● Available in 8 pin SOIC and TSSOP
● Qualified for Industrial Temp Spec. (-40°C to +85°C) P1727 significant system cost savings by reducing the number of circuit board layers and shielding that are traditionally required to pass EMI regulations. Lowering EMI by increasing a signal’s bandwidth is called “spread spectrum clock generation”. Product
DESCRIPTION
The P1727 is a versatile spread spectrum frequency modulator designed specifically for a wide range of clock frequencies. The P1727 reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of down stream (clock and data dependent signals).
