PCS3P7101A Datasheet | PulseCore Semiconductor

September 2006 rev 0.1 Low Power Peak EMI Reducing clock synthesizer .. Features - - - - - - - - Generates a 4x low EMI clock at the output Input frequency: 25 MHz Integrated loop filter ponents. Frequency deviation: ±0.25% (Typ) center spread Operates with a 3.3V Supply. Low power CMOS design. Available in 8-pin SOIC package. Pin patible with ICS 341-22 Product Description The PCS3P7101A is a low cost, single-output, clock synthesizer. The PCS3P7101A generates a 4x output clock from a 25 MHz standard fundamental mode, inexpensive crystal, or clock. It can replace multiple crystals and oscillators, saving valuable board space and cost. The device employs Spread Spectrum technique to reduce system electro-magnetic interference (EMI). The device also has a power-down feature that tri-state the clock output and turns off the PLL when the PD pin is taken low. Block Diagram VDD PD Modulation XIN/CLKIN XOUT Crystal Oscillator Frequency Divider Feedback Divider Phase Detector Loop Filter Output Divider Mod OUT Pulse Core Semiconductor Corporation 1715 S. Bas Ave Suite 200, Campbell, CA 95008 - Tel: 408-879-9077 - Fax: 408-879-9018 .pulsecoresemi. Notice: The information in this document is subject to change without notice. September 2006 rev 0.1 Pin Configuration CLKIN/XIN 1 VDD 2 8 XOUT .. VSS 3 NC 4 6 NC 5 Mod OUT Pin Description Pin # Pin Name 1 2 3 4 5 6 7 8 CLKIN/XIN VDD VSS NC Mod OUT NC PD XOUT Type I P P O I O Description Crystal connection or external reference frequency input. This pin has dual functions. It can be connected either to an external crystal or to an external reference clock. Power supply for the entire chip. Ground connection No Connection Spread spectrum low EMI 4x clock output. No Connection Powers down entire chip. Tri-states CLK outputs when low. Has an Internal pull-up resistor. Crystal connection. If using an external reference,...