AND211RA Datasheet | Purdy Electronics

Features - Low power requirement - Special shape - All plastic molded lens - Ga P - Red - Ro HS pliant 3.9(.154) 1.0 Max 7(.276) 1.9(.075) Optical Characteristics (T = 25°C) 27(1.063) Min Cathode 1.5(.06)Typ Part Number Color LED Lens Red Lens Desc. 0.5(0.2) Axial Luminous Test Intensity Condition (mcd) (IF- m A) Min. Typ. 0.5 1.0 10 Viewing Angle 2θ1/2 (deg) 110 Red Diffused 2.54(0.1) Absolute Maximum Ratings (TA = 25°C) Characteristics Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range Symbol IF VR PD TOpr TStg Rating 25 5 120 -40 to +85 -40 to +85 Unit m A V m W °C °C Electro-Optical Characteristics (TA = 25°C) Characteristics Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Symbol VF IR λp λ Test Condition Typ. IF = 20m A VR = 5V IF = 20m A IF = 20m A 2.0 - 700 45 AND211RA (Red) Max. 2.5 10 - - V µA nm nm Unit Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation - 720 Palomar Avenue - Sunnyvale, CA 94085 Tel: 408.523.8200 - Fax: 408.733.1287 - email@purdyelectronics. - .purdyelectronics. 7/18/07 Standard Bright LED Lamps .. IV vs. TC 50 3 TA = 25°C IF vs....