AND262HG Datasheet | Purdy Electronics

Ultra Bright LED Lamps: Type 3 Weight: 0.14g Unit: mm .. Ga N High Brightness Green Light Emission - 3 mm (T-1) Package - Peak wavelength (λp = 525nm) high bright emission - All plastic mold type, clear colorless lens - Low drive current: 1 to 20 m A DC - Excellent On-Off contrast ratio - Fast response time, capable of pulse operation - High power intensity - High reliability - Ro HS pliant Maximum Ratings (Ta = 25°C) Characteristics Forward Current Reverse Voltage Power Dissipation Operating Temperature Range Storage Temperature Range Symbol IF VR PD TOpr TSig Rating 30 5 120 -40 to 85 -40 to 100 Unit m A V m W C C Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV λP ∆λ λd θ Test Condition IF = 20 m A VR = 5V IF = 20 m A IF = 20 m A IF = 20 m A IF = 20 m A IV = 1/2 Peak Minimum - - 630 - - - - Typical - 1,000 525 35 530 35 Maximum 4.0 50 - - - - - Unit V µA mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260 C max. Soldering time: 5 sec. max. Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is remended to use wrist band or antistatic gloves when handling these LEDs Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics...