HYS64T128020EDL-2.5-C Datasheet | Qimonda AG

Overview This chapter gives an overview of the 200-Pin SO-DIMM DDR2 SDRAM Modules product family and describes its main characteristics. Features - - - - - - - - - - Auto Refresh for temperatures above 85 °C t REFI = 3.9 µs. Programmable self refresh rate via EMRS2 setting. Programmable partial array refresh via EMRS2 settings. DCC enabling via EMRS2 setting. All inputs and outputs SSTL_1.8 patible Off-Chip Driver Impedance Adjustment (OCD) and On-Die Termination (ODT) Serial Presence Detect with E2PROM SO-DIMM Dimensions (nominal): 30 mm high, 67.6 mm wide Based on standard reference layouts Raw Card “A” and “F” Ro HS pliant products1) - 200-Pin PC2- 6400, PC2- 5300 and PC2- 4200 DDR2 SDRAM memory modules. - 128M × 64, 256M × 64 module organization and 64M × 16 and 128M × 8 chip organization - Standard Double-Data-Rate-Two Synchronous DRAMs (DDR2 SDRAM) with a single + 1.8 V (± 0.1 V) power supply - 1 GB and 2 GB modules built with 1-Gbit DDR2 SDRAMs in PG-TFBGA-84 and PG-TFBGA-60 chipsize packages - All speed grades faster than DDR2-400 ply with DDR2-400 timing specifications. - Programmable CAS Latencies (3, 4,5 and 6 ), Burst Length (8 & 4) and Burst Type - Auto Refresh (CBR) and Self Refresh TABLE 1 Performance Table Product Type Speed Code Speed Grade Max. Clock Frequency @CL6 @CL5 @CL4 @CL3 Min. RAS-CAS-Delay Min. Row Precharge Time Min. Row Active Time Min. Row Cycle Time - 2.5F PC2- 6400 5- 5- 5 - 2.5 PC2- 6400 6- 6- 6 400 333 266 200 15 15 45 60 - 3 PC2- 5300 4- 4- 4 - 333 333 200 12 12 45 57 - 3S PC2- 5300 5- 5- 5 - 333 266 200 15 15 45 60 - 3.7 PC2- 4200 4- 4- 4 - 266 266 200 15 15 45 60 Unit - MHz MHz MHz MHz ns ns ns ns f CK6 f CK5 f CK4 f CK3 t RCD t RP t RAS t RC 400 400 266 200 12.5 12.5 45 57.5 1) Ro HS pliant Product: Restriction of the use of certain hazardous substances (Ro HS) in electrical...