KT6368A
KT6368A is Controller manufactured by QingYue.
Features
32-bit DSP supports hardware Float Point Unit (FPU) Up to 160MHz programmable processor 64Vectored interrupts 4 Levels interrupt priority
Bluetooth pliant with Bluetooth V5.1+BR+EDR+BLE specification Meet class1 class2 and class3 transmitting power requirement Support GFSK and π/4 DQPSK all paket types Provides +6dbm transmitting power receiver with -90d Bm sensitivity Fast AGC for enhanced dynamic range Supports a2dpavctpavdtpavrcphfpsppsmpattgap gattrfmsdpl2cap profile
Temperature
Operating temperature: -40℃ to +85℃ Storage temperature: -65℃ to +150℃
Peripherals
One full speed USB 2.0 OTG controller Six multi-function 32-bit timers, support capture and PWM mode Three full-duplex basic UART, UART0 and UART1 supports DMA mode One hardware IIC interface supports host and device mode 10-bit ADC for analog sampling External wake up/interrupt on all GPIOs
Low voltage LDO for internal digital and analog circuit supply 3u A current consumption in the soft-off mode Built-in LDO for the core, I/O, Bluetooth and flash VBAT is 2.2V to 3.4V VDDIO is 2.2V to 3.4V
Packages
SOP8
Applications
Bluetooth IOT
1、Pin Definition
1.1 Pin Assignment
KT6368A Datasheet
Figure 1-1 KT6368A Package Diagram
KT6368A Datasheet
1.2 Pin Description
Table 1-1 KT6368A Pin Description
PIN Name
NO. VBAT
1 VDDIO
2 PB1
3 VSS 4 BT_RF 5 BTOSCI 6 BTOSCO
7 USBDM
USBDP 8
PA6
I/O Type
P P I/O P / I O
I/O
I/O
I/O
Drive (m A)
Function
/ /
GPIO (pull up)
/
USB Negative Data (pull...
