RFFM6204 Datasheet | Qorvo

RFMD + Tri Quint = Qorvo 2.0V to 4.0V, 2.4GHz Front End Module The RFFM6204 is a plete integrated solution in a single Front End Module (FEM) for Zigbee® applications in the 2.4GHz to 2.5GHz band. The ultra-small factor and integrated matching minimizes layout area in the customer's application and greatly reduces the number of external ponents. This simplifies the total front end solution by reducing the bill of materials, system footprint, and manufacturing cost. The FEM integrates a power amplifier (PA) plus harmonic filter in the transmit (TX) path, a low noise amplifier (LNA) in the receive (RX) path, and a low loss bidirectional through mode path. The RFFM6204 incorporates two single-pole triple-throw (SP3T) switches to provide a single balanced TDD access and a single antenna port for TX, RX, and through mode paths. The device is provided in a 2.5mm x 2.5mm x 0.5mm, 16-pin QFN package. Package: QFN, 16-pin, 2.5mm x 2.5mm x 0.5mm Features - Tx Output Power = 13d Bm - Integrated RF Front End Module with Rx/Tx Balun, PA, Filter, LNA, Bidirectional Thru path and 2-SP3T Switches - Single Bidirectional Differential Transceiver Interface. - Voltage Range = 2.0V to 4.0V - Rx Noise Figure = 2.5d B VDD_TX C_EN C_BYP C_RX Control Logic C_TX 1 CT 2 RFN 3 RFP 4 BALUN 12 GND 11 ANT 10 GND 9 N/C Applications - Zig Bee® 802.15.4 Based Systems for Remote Monitoring and Control - AA Battery Operation - 2.4GHz ISM Band Applications - Smart Meters for Energy Management N/C GND VDD_RX GND Functional Block Diagram Ordering Information RFFM6204SB Standard 5 piece...