The RE46C145 is low power CMOS photoelectric type smoke detector IC.
Key Features
for a photoelectric type smoke detector. The design incorporates a gain selectable photo amplifier for use with an infrared emitter/detector pair. An internal oscillator strobes power to the smoke detection circuitry for 100us every 10 seconds to keep standby current to a minimum. If smoke is sensed the detection rate is increased to verify an alarm condition. A high gain mode is available for push button chamber testing. In the diagnostic mode the photo amplifier output is available on pin 15 f.
Full PDF Text Transcription for RE46C145 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
RE46C145. For precise diagrams, tables, and layout, please refer to the original PDF.
www.DataSheet4U.com R&E International RE46C145 CMOS Photoelectric Smoke Detector ASIC with Interconnect and Timer Mode Product Specification General Description The RE46C...
View more extracted text
ect and Timer Mode Product Specification General Description The RE46C145 is low power CMOS photoelectric type smoke detector IC. With minimal external components this circuit will provide all the required features for a photoelectric type smoke detector. The design incorporates a gain selectable photo amplifier for use with an infrared emitter/detector pair. An internal oscillator strobes power to the smoke detection circuitry for 100us every 10 seconds to keep standby current to a minimum. If smoke is sensed the detection rate is increased to verify an alarm condition. A high gain mode is available for push button chambe
RE46C145 Datasheet
