RPX-1.5 Datasheet | RECOM

Features Power Module - Buck regulator power module with integrated shielded inductor - 36VDC input voltage, 1.5A output current - SCP, OCP, OTP, and UVLO protection - 3.0 x 5.0mm low profile QFN package - Flip-chip technology for improved thermal management - Enable, power good, soft start, and sync functions DC/DC Converter Description The RPX-1.5 is a buck converter with an integrated inductor in a pact 3mm x 5mm x 1.6mm thermally-enhanced QFN package. The input range is from 4 to 36VDC, allowing 5V, 12V, or 24V supply 1.5 Amp QFN 3 voltages to be used. The output voltage can be set with two resistors in the range from 0.8 up to 30VDC. Package The output current is up to 1.5A and is fully protected against continuous short-circuits, output overcurrent, or over-temperature faults. RE CTS RE CTS ERS CO ERS CO Selection Guide Part Number Input Voltage Range [VDC] Output Voltage (1) [VDC] Output Current [m A] - 36 - 30 Notes: Note1: Refer to “SAFE OPERATING AREA” Note2: Efficiency tested at VIN= 12VDC, full load, and VOUT= 3.3VDC Efficiency typ. (2) [%] Model Numbering RPX-1.5-__ Output Current Packaging (3) Notes: Note3: Add suffix “-R” for tape and reel...