Datasheet4U Logo Datasheet4U.com

DK1000R - 315MHZ REMOTE KEYLESS ENTRY RECEIVER

General Description

The DK1000R is the receiver half of our remote keyless entry system evaluation kit.

It is designed to allow the user to easily and quickly demonstrate the operation of the RF2919 in a typical application.

Everything needed to demonstrate a one way receiver is included.

Key Features

  • Complete Receiver.
  • Programmable Rolling Code Decoder.
  • LED and Buzzer Indicators.
  • Mates with DK1000T Transmitter.
  • Battery and Antenna Antenna IF Filter RSSI Rolling Code Decoder T1 S1 S2 S3 ÷ 64/65 or ÷ 128/129 RF2919 FRX /n Ordering Information DK1000R DK1000R 315MHz Remote Keyless Entry Receiver Available only as part of the DK1000 Reference Design Kit Tel (336) 664 1233 Fax (336) 664 0454 http://www. rfmd. com 16 REF.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DK100-B020 DC Current transducer LEM
DK100-B10 DC Current transducer LEM
DK100-B420 DC Current transducer LEM
DK100-B5 DC Current transducer LEM
DK106 HIGH PERFORMANCE SWITCH MODE POWER CONTROLLER DongKe Semicondutor

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DK1000R 16 Typical Applications • Remote Keyless Entry • Wireless Security Systems • Remote Monitoring • Remote Controls 315MHZ REMOTE KEYLESS ENTRY RECEIVER Product Description The DK1000R is the receiver half of our remote keyless entry system evaluation kit. It is designed to allow the user to easily and quickly demonstrate the operation of the RF2919 in a typical application. Everything needed to demonstrate a one way receiver is included. The RF2919 is setup to demonstrate a typical keyless entry system using a rolling code decoder while operating as an FCC15.231 type device at 315MHz. A battery is included and the antenna is printed on the circuit board. This unit is designed to work with the mating transmitter, DK1000T.