Datasheet4U Logo Datasheet4U.com

ML5805 - 5.8GHz Variable Data Rate FSK Transceiver

General Description

The ML5805 is a single chip fully integrated Frequency Shift Keyed (FSK) transceiver developed for a variety of applications operating in the 5.725GHz to 5.850GHz unlicensed ISM band.

Key Features

  • Highly integrated 5.8GHz FSK Transceiver with selectable data rates; 576kbps, 1.152Mbps, 1.536Mbps, 1.755Mpbs, 2.048Mbps Fractional-N synthesizer with 30 Hz resolution Low-IF receiver eliminates external IF filters Fully integrated digital FIR Tx data filter, IF filters, FM discriminator, and Rx data filter. Self-calibrating VCO and filters eliminate tuning. Operating Modes include DSSS-DCT, DECT, and high rate (2.048Mbps) for wireless audio and video -97dBm sensitivity (0.1%BER) with Inte.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML5800 FSK Transceiver Micro Linear
ML5824 ML5824 2.4GHz to 5.8GHz Frequency Translator Micro Linear Corporation
ML5825 2.4GHz to 5.8GHz Frequency Translator SIRENZA MICRODEVICES
ML58C88 CMOS BTL Drivers Minilogic Device Corporation
ML501 1.9-2.7 GHz High IP3 Mixer WJ Communication

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ML5805 www.DataSheet4U.com 5.8GHz Variable Data Rate FSK Transceiver with Integrated PA Preliminary Data Sheet GENERAL DESCRIPTION The ML5805 is a single chip fully integrated Frequency Shift Keyed (FSK) transceiver developed for a variety of applications operating in the 5.725GHz to 5.850GHz unlicensed ISM band. The ML5805 is mode selectable for operation with digital cordless phones (DSSS or DECT) and higher data rate streaming applications like wireless audio and video. The ML5805 contains a dual-conversion low-IF receiver with all channel selectivity on chip. IF filtering, IF gain, and demodulation are performed on-chip, eliminating the need for any external IF filters or production tuning. A post detection filter and a data slicer are integrated to complete the receiver.