RF2323 Datasheet PDF (3V GENERAL PURPOSE AMPLIFIER) | Download RF Micro Devices RF2323

RF2323 - 3V GENERAL PURPOSE AMPLIFIER

Description

The RF2323 is a general purpose, low-cost silicon amplifier designed for operation from a 3V supply.

The circuit configuration with resistive feedback allows for broadband cascadable amplification.

Features

DC to >2000MHz Operation.
2.7V to 3.3V Single Supply.
2.3dB Noise Figure.
21dB Gain at 900MHz.
12dB Gain at 1900MHz.
High Isolation (33dB at 900MHz) GND 1 GND 2 RF IN 3 5 RF OUT 4 VCC Ordering Information RF2323 RF2323 PCBA 3V General Purpose Amplifier Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://www. rfmd. com.

Datasheet Details

Part number	RF2323
Manufacturer	RF Micro Devices
File Size	250.51 KB
Description	3V GENERAL PURPOSE AMPLIFIER
Datasheet	RF2323 Datasheet

📁 Similar Datasheet

RF23S-XXXXX-XXXXXX-XXXX - CABLE (Samtec)

RF2001 - SAW Filter (REYCONNS)

RF2001 - Fast recovery Diodes (Rohm)

RF2001NS2D - Super Fast Recovery Diode (ROHM)

RF2001NS2DFH - Super Fast Recovery Diode (ROHM)

RF2001NS3D - Fast Recovery Diodes (Rohm)

RF2001NS3DFH - Super Fast Recovery Diode (ROHM)

RF2001T2D - Fast Recovery Diode (Rohm)

RF2001T2DFH - Fast Recovery Diode (ROHM)

RF2001T2DNZ - Super Fast Recovery Diode (ROHM)

Full PDF Text Transcription

Click to expand full text

Preliminary RF2323 3V GENERAL PURPOSE AMPLIFIER 4 Typical Applications • Broadband Gain Blocks • Low Noise Amplifiers • IF or RF Buffer Amplifiers • Driver Stage for Power Amplifiers • Oscillator Loop Amplifiers • Receiver Front-Ends Product Description The RF2323 is a general purpose, low-cost silicon amplifier designed for operation from a 3V supply. The circuit configuration with resistive feedback allows for broadband cascadable amplification. Capacitive compensation extends the bandwidth of the amplifier and input stage design optimizes noise figure. The device is unconditionally stable and internally matched to 50 Ω. The only external components required for specified performance are bypass and DC blocking capacitors (as shown in application schematic).

Published: Apr 16, 2005 |