RF2619 Datasheet | RF Micro Devices

Description The RF2619 is a plete AGC amplifier designed for the transmit section of 3V dual-mode CDMA/FM cellular applications. It is designed to amplify IF signals while providing more than 84d B of gain control range. Noise Figure, IP3, and other specifications are designed to be patible with the IS-95 Interim Standard for CDMA cellular munications. This circuit is designed as part of the RFMD CDMA Chip Set, consisting of this Transmit IF AGC Amp, a Transmit Upconverter, a Receive LNA/Mixer, and a Receive IF AGC Amp. The IC is manufactured on an advanced high frequency Silicon Bipolar process and is packaged in a standard miniature 16-lead plastic SSOP package. 0.157 0.150 0.012 0.008 0.196 0.189 0.025 -A0.0098 0.0040 0.2440 0.2284 0.0688 0.0532 8° MAX 0°MIN 0.050 0.016 0.0098 0.0075 NOTES: 1. Shaded lead is Pin 1. 2. All dimensions are excluding mold flash. 3. Lead coplanarity - 0.005 with respect to datum "A". Optimum Technology Matching® Applied Si Bi-CMOS Si Ge HBT Si CMOS - Supports Dual Mode Operation CDMA+ 1 CDMA- 2 GND 3 GND 4 GND 5 GND 6 GND 7 NC 8 GAIN CONTROL 16 GC 15 VCC 14 VCC 13 VCC - -48d B to +42d B Gain Control Range - Single 3V Power Supply - Monolithic Construction - 12MHz to 175MHz Operation - Miniature Surface Mount Package 12 GND 11 GND 10 OUT+ 9 OUT- Ordering Information RF2619 RF2619 PCBA 3V CDMA/FM Transmit AGC Amplifier Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://.rfmd. Rev B5 010720 10-25 IF AMPLIERS üSi BJT Package Style: SSOP-16 Ga As HBT Ga As MESFET Features Absolute Maximum Ratings Parameter Supply Voltage Control Voltage Input Power Levels Operating Ambient Temperature Storage Temperature Rating...