Datasheet4U Logo Datasheet4U.com

RF2713 - QUADRATURE MODULATOR/DEMODULATOR

Description

The RF2713 is a monolithic integrated quadrature modulator/demodulator.

The demodulator is used to recover the I and Q baseband signals from the amplified and filtered IF.

Likewise, the inputs and outputs can be reconfigured to modulate I/Q signals onto an RF carrier.

Features

  • 3V to 6V Operation.
  • Modulation or Demodulation.
  • IF From 100kHz to 250MHz.
  • Baseband From DC to 50MHz.
  • Digital LO Quadrature Divider.
  • Low Power and Small Size I INPUT A 1 I INPUT B 2 Q INPUT A 3 Q INPUT B 4 BG OUT 5 I IF OUT 6 Q IF OUT 7 QUAD DIV. BY 2 14 VCC 13 LO INPUT 12 GND 11 GND 10 GND 9 I OUT 8 Q OUT Ordering Information RF2713 Quadrature Modulator/Demodulator RF2713 PCBA-D Fully Assembled Evaluation Board (Demodulator) RF2713 PCBA-M.

📥 Download Datasheet

Datasheet preview – RF2713

Datasheet Details

Part number RF2713
Manufacturer RF Micro Devices
File Size 135.81 KB
Description QUADRATURE MODULATOR/DEMODULATOR
Datasheet download datasheet RF2713 Datasheet
Additional preview pages of the RF2713 datasheet.

📁 Similar Datasheet

Other Datasheets by RF Micro Devices
  • RF2705 - LOW NOISE/ MULTI-MODE/ QUAD-BAND/ QUADRATURE MODULATOR AND PA DRIVER
  • RF2705G - QUADRATURE MODULATOR AND PA DRIVER
  • RF2721 - QUADRATURE DEMODULATOR
  • RF2722 - GSM/GPRS/EDGE RECEIVER
  • RF2043 - GENERAL PURPOSE AMPLIFIER
  • RF2044 - GENERAL PURPOSE AMPLIFIER
  • RF2044A - GENERAL PURPOSE AMPLIFIER
  • RF2045 - GENERAL PURPOSE AMPLIFIER

Full PDF Text Transcription

Click to expand full text
Preliminary RF2713 QUADRATURE MODULATOR/DEMODULATOR 7 Typical Applications • Digital and Analog Receivers and Transmitters • High Data Rate Digital Communications • Spread-Spectrum Communication Systems • Interactive Cable Systems • Portable Battery-Powered Equipment Product Description The RF2713 is a monolithic integrated quadrature modulator/demodulator. The demodulator is used to recover the I and Q baseband signals from the amplified and filtered IF. Likewise, the inputs and outputs can be reconfigured to modulate I/Q signals onto an RF carrier. The RF2713 is intended for IF systems where the IF frequency ranges from 100kHz to 250MHz, and the LO frequency is two times the IF.
Published: |