Datasheet4U Logo Datasheet4U.com

RFFM4204 - WiFi 802.11b/g/n/ac Front End Module

General Description

RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate.

Key Features

  • Voltage Supply: 5V.
  • POUT = 24dBm, 256QAM MCS9 HT40 at 1.8% DEVM.
  • POUT = 25dBm, 64QAM MCS7 HT20 and HT40 at 3% DEVM.
  • Input and Output Matched to 50Ω.
  • Integrated PA, SPDT, and LNA with bypass.
  • High Impedance Enable Pin VCC1 GND VCC2 VCC3 GND VBIAS 1 24 23 22 21 20 19 GND GND 2 18 C_TX GND 3 17 GND TX 4 16 GND GND 5 15 ANT PA_EN 6 14 GND NC 7 8 9 10 11 12 13 C_RX.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RFFM4201 2.4GHz TO 2.5GHz HIGH POWER FRONT END MODULE RFMD
RFFM4202 2.4GHz TO 2.5GHz HIGH POWER FRONT END MODULE RFMD
RFFM4203 2.4GHz to 2.5GHz 802.11b/g/n/ac WiFi Front End Module RFMD
RFFM4227 Wi-Fi Low Noise Amplifier Qorvo
RFFM4293 2.4GHz to 2.5GHz 802.11b/g/n/ac WiFi Front End Module RFMD

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RFFM4200 2.4GHz TO 2.5GHz HIGH POWER FRONT-END
RFFM4501E 802.11a/n/ac Front End Module
RFFM4501F 4.9GHz to 5.85GHz 802.11a/n/ac WiFi Front End Module
RFFM4503 4.9GHz to 5.85GHz 802.11a/n/ac Wi-Fi Front End Module
RFFM4551 4.9GHz to 5.925GHz 802.11a/n/ac Wi-Fi Front End Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RFFM4204 WiFi 802.11b/g/n/ac Front End Module 2.4GHz to 2.5GHz The RFFM4204 provides a complete solution in a single front end module (FEM) by integrating the power amplifier (PA), low noise amplifier (LNA) with bypass, power detector, a Single Pole Double Throw (SPDT) switch, and some filtering for harmonic rejection. The integrated matching greatly reduces the number of external components and layout area in the customer application. This simplifies the total front end solution by reducing the bill of materials, system footprint, and manufacturing cost. The RFFM4204 is provided in a 6.0mm X 6.0mm X 0.9mm 24-pin laminate package. The FEM meets or exceeds the RF front end needs of IEEE 802.11b/g/n/ac WiFi RF systems. RFFM4204 Package: Laminate, 24-pin, 6.0mm x 6.0mm x 0.