Datasheet4U Logo Datasheet4U.com

RFFM8511 - WiFi FRONT END MODULE

Key Features

  • POUT = +18.0dBm at 3.6V, 802.11ac 80MHz MCS9 256QAM at 1.8% Dynamic EVM Compliance.
  • POUT = +19.0dBm, 11n 20MHz 2.5% (-32dB)EVM.
  • POUT = +21.0dBm at 3.6V, 802.11ac 80MHz MCS0 at Spectral Mask Compliance.
  • Input and Output Matched to 50Ω.
  • Integrated 5GHz PA, SP2T Switch, LNA, and PDET.
  • Low Height Package, Suited for Module and Chip On Board (CoB) designs.
  • Supports low power mode for improved efficiency.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RFFM8516 5.0 GHz Wi-Fi Front-End Module qorvo
RFFM8505 4.9GHZ to 5.85GHZ 802.11a/n/ac WiFi Front End Module RFMD
RFFM8216 2.4 GHz Integrated Wi-Fi Front-End Module qorvo
RFFM4201 2.4GHz TO 2.5GHz HIGH POWER FRONT END MODULE RFMD
RFFM4202 2.4GHz TO 2.5GHz HIGH POWER FRONT END MODULE RFMD

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RFFM8500 FRONT END MODULE
RFFM8500Q FRONT END MODULE
RFFM8502 WiFi Front End Module
RFFM8504 WiFi FRONT END MODULE
RFFM8506 WiFi FRONT END MODULE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DRAFT DRAFT RFFM8511 4.9GHz to 5.85GHz 802.11a/n/ac WiFi Front End Module The RFFM8511 provides a complete integrated solution in a single front end module (FEM) for WiFi 802.11a/n/ac systems. The ultra-small factor and integrated matching minimizes layout area in the customer’s application and greatly reduces the number of external components. This simplifies the total front end solution by reducing the bill of materials, system footprint, and manufacturing cost. The RFFM8511 integrates a 5GHz power amplifier (PA), single pole double throw switch (SP2T), LNA with bypass, and a power detector coupler for improved accuracy. The device is provided in a 2.5mm x 2.5mm x 0.40mm, 16-pin QFN package.