OP4015B - Optical Timing Clock

RF Monolithics

Datasheet Details

Part number	OP4015B
Manufacturer	RF Monolithics
File Size	119.97 KB
Description	Optical Timing Clock
Datasheet	OP4015B Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
OP4010B	Optical Timing Clock	muRata
OP4012B	Optical Timing Clock	muRata
OP400	Quad Low-Offset / Low-Power Operational Amplifier	Analog Devices
OP400A	Low-Power Operational Amplifier	Maxwell
OP41	LOW-BIAS-CURRENT / HIGH-STABILITY JFET OPERATIONAL AMPLIFIER	Analog Devices

Other Datasheets by RF Monolithics

Part Number	Description
OP4010B	Optical Timing Clock
OP4011B	Optical Timing Clock
OP4012B	Optical Timing Clock
OP4013B	Optical Timing Clock
OP4014B	Optical Timing Clock

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Preliminary OP4015B • • • Quartz SAW Stabilized and Filtered “Diff Sine” Technology Fundamental-Mode Oscillation at 780.881 MHz Voltage Tunable for Phase Lock Loop Operations The output of this device is generated and filtered by narrowband quartz SAW elements at 780.881 MHz. The configuration of this clock is intended to provide a pure signal for optical timing applications in noisy signal environments. The Q/Qbar differential output swing of ±1 volt about 0 vdc has symmetry better than ±1% into loads from 40 ohms to 70 ohms; determined by customer application. The long term frequency accuracy is set by an external reference source allowing this device to complete a Phase Lock Loop design without the usual noise and jitter problems associated with PLL’s. 780.