AM-HIRK
AM-HIRK is RF RECEIVER DECODER HYBRID manufactured by RF.
Features
- Miniature RF Rx/Decoder System.
- Superhet Rx with Keeloq Decoding
- Advanced Laser Trimmed Hybrid
- Range up to 100 Metres
- Easy Learn Transmitter Feature
.
- CMOS/TTL Outputs, Momentary or Latching.
- Direct Led Drive Data Reception
- Single Supply 5V
- Low Power Consumption
- EMC pliant for use in Europe
- FCC Certified for use in USA
Applications
- General Remote Control Systems.
- Garage Door Openers.
- Car, Caravan, Motorcycle Alarms
- Remote Switching.
- Remote Gates.
- Paging.
Description
This miniature single in line (SIL) hybrid module is a plete three channel Radio Receiver/Decoder. When used with the AM-110 series pocket keyfobs a plete remote telemetry system is obtained with upto 80metres range. The module consists of a front end Super-Heterodyne RF receiver with an embedded microcontroller decoding a highly secure Keeloq protocol signal. The module has an easy-to-use 'LEARN' facility, and is capable of learning up to 50 unique keyfob encoders. The module requires a 5V power supply, and provides a data reception direct LED drive and three digital data outputs. The outputs may be programmed for momentary or latching configuration.
Application Circuit
Data Outputs AM-Hi RX 1 7 11 13 16 18 25
1 Not Used 3 2
Vcc Data Reception & Learn LED
Vcc GND Link 1 & 2 (PSW)
Program Switch
DS097-5
Feb ‘02
©2002 REG No 277 4001, England.
Page 1
RF RECEIVER DECODER HYBRID.
Pin Descriptions Pin No 1 2 3 7 11 13 14 15 16 18 19 20 21 22 23 24 25 Name Vcc-RF GND-RF ANT GND-RF GND-AF TP O/P-AF Vcc-AF GND-AF Link2 Link1 PSW LED O/P2 O/P3 O/P4 O/P1 +5V Supply Voltage RF Ground Connect Antenna to this input RF Ground AF Ground Test Point Data output from RF receiver (CMOS/TTL signal) +5V Supply Voltage AF Ground Connect to GND to make Link, may be left O/C if not required Connect to GND to make Link, may be left O/C if not required Description
Programming Switch input, This is used when learning new transmitters. External LED sink...
