Datasheet4U Logo Datasheet4U.com

RFLA2018 - Variable Gain Low Noise High Linearity Amplifier

Key Features

  • 2500 MHz to 2570 MHz Operation.
  • Internally Matched to 50 Ω on All RF Ports.
  • Analog Voltage Variable Attenuator with +3.3 V Control Range.
  • Bypass Mode of LNA for High Dynamic Range.
  • Max Gain = 35 dB Min.
  • Noise Figure of 1.0 dB Typical.
  • Gain Control Range > 33 dB.
  • High IIP3 = +3 dBm.
  • Single +5 V Supply.
  • Small 16-Pin, 8.0 mm x 8.0 mm, Multi-Chip Module (MCM).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RFLA1010 HIGH-LINEARITY AMPLIFIER RF Micro Devices
RFLA1018S High Linearity Amplifier RF Micro Devices
RFLA1022 High Linearity Amplifier RF Micro Devices
RFLA1038 Variable Gain Low Noise High Linearity Amplifier RF Micro Devices
RFLA9002 Dual Low Noise Amplifier RF Micro Devices

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RFLA1018 VARIABLE GAIN LOW NOISE HIGH LINEARITY AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RFMD + TriQuint = Qorvo RFLA2018 Variable Gain Low Noise High Linearity Amplifier 2500 MHz to 2570 MHz The RFLA2018 is an analog-controlled voltage variable gain amplifier featuring high linearity and very low noise figure. The LNA with bypass mode and variable attenuator provides a minimum of 35 dB of dynamic range. The RFLA2018 has a +3.3 V control range with maximum gain at 0 V. The LNA is temperature compensated to reduce gain variation. Noise figure is 1.0 dB and Input IP3 of +3 dBm makes this component ideal for receiver input lineups. The RFLA2018 is packaged in a small 8.0 mm x 8.0 mm leadless MCM that is internally matched to 50 Ω on all RF ports.