Datasheet4U Logo Datasheet4U.com

R1200Z - STEP-UP DC/DC CONVERTER FOR OLED BACK LIGHT

Download the R1200Z datasheet PDF. This datasheet also covers the R1200 variant, as both devices belong to the same step-up dc/dc converter for oled back light family and are provided as variant models within a single manufacturer datasheet.

General Description

WLCSP-6-P1 (Non-promotion) Pin No 1 2 3 4 5 6 Symbol Lx VIN VFB CE VOUT GND Pin Description Switching Pin (Open Drain Output) Power Supply Input Pin Feedback Pin Chip Enable Pin ("H" Active) Output Pin Ground Pin DFN1616

Key Features

  • Supply Current Typ. 500μA.
  • Standby Current Max. 3μA.
  • Input Voltage Range 2.3V to 5.5V.
  • Feedback Voltage 1.0V (Externally adjustable).
  • Feedback Voltage Accuracy±1.5%.
  • Temperature-Drift Coefficient of Feedback Voltage ±150ppm/°C.
  • Oscillator Frequency Typ. 1.2MHz.
  • Maximum Duty Cycle Typ. 91%.
  • Switch ON Resistance Typ. 1.35Ω.
  • UVLO Detector Threshold Typ. 2.0V.
  • Soft-start Time Typ. 1.5ms.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (R1200-RICHO.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number R1200Z
Manufacturer RICHO
File Size 265.57 KB
Description STEP-UP DC/DC CONVERTER FOR OLED BACK LIGHT
Datasheet download datasheet R1200Z Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
R1200Z STEP-UP DC/DC CONVERTER Nisshinbo
R1200 HIGH VOLTAGE SILICON RECTIFIERS SEMTECH
R1200 500mA & 200mA High Voltage Silicon Rectifier SEP ELECTRONIC
R1200 HIGH VOLTAGE RECTIGIERS HY
R1200 HIGH VOLTAGE RECTIFIER RFE

Other Datasheets by RICHO

Part Number Description
R1200K STEP-UP DC/DC CONVERTER FOR OLED BACK LIGHT
R1200L STEP-UP DC/DC CONVERTER FOR OLED BACK LIGHT
R1200N STEP-UP DC/DC CONVERTER FOR OLED BACK LIGHT
R1240K003x-TR 30V Input PWM Step-down DC/DC Converter
R1240N001x-TR-FE 30V Input PWM Step-down DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
R1200x SERIES STEP-UP DC/DC CONVERTER FOR OLED BACK LIGHT with SHUTDOWN FUNCTION NO.EA-192-130502 OUTLINE R1200x series are CMOS-based control type step-up DC/DC converter with low supply current ICs. Each of these ICs consists of a Nch MOSFET, NPN transistor, an oscillator, PWM comparator, a voltage reference unit, an error amplifier, a current limit circuit, an under voltage lockout circuit (UVLO), an over voltage protection circuit (OVP), and a soft start circuit. As the external components, an inductor, resistances or capacitors are necessary to make a constant output voltage of step-up DC/DC converter with the R1200x. At standby mode, the NPN transistor can separate the output from the input. During the situation of that, there are two versions.