R5531V002 Datasheet | RICOH

Apr. 2003 PCMCIA Power Controller IDESCRIPTION The R5531V002 switches between the three VCC voltages (0V/3.3V/5.0V) and the VPP voltages (off/0V/3.3V/5.0V). If VCC pin or VPP pin may be clamped to the GND, short current limit works at 1A(Min.) for VCC and 0.2A(Min.) for VPP. The R5531V002 is suitable for standard PCMCIA power controllers. G Low on resistance P-channel MOSFET Switch G Over- Current Limit Protection .. G Thermal Shutdown Protection G Built-in Open-drain Flag Pin G Low Consumption Current G Break-Before-Make Switching G SSOP-16 pin Package IFEATURES IAPPLICATIONS PC card Power Supply Pin Voltage Switch Card-bus Slot Power Supply Control PC Card Reader/Writer I PIN CONFIGURATION (Top view) EN V CC 5_ 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 GND 3_EN VCC5 IN VCC OUT VCC5 IN VCCOUT VCC3 IN EN0 EN1 FLG NC NC VPPOUT VCCOUT Rev. 1.10 -1- I BLOCK DIAGRAM VCC5 IN VPPOUT VCCOUT VCC 3IN .. EN1 EN0 GATE CONTROL LOGIC VCC5_ EN 3_EN VCC CURRENT LIMIT THERMAL SHUTDOWN FLAG CONTROL LOGIC I ABSOLUTE MAXIMUM RATINGS Item Input Voltage(5V) Input Voltage(3V) Flag Voltage Logic Input Voltage Output Current Power Dissipation Operating Temperature Range Storage Temperature Range Symbol Vcc5 Vcc3 VFLG VIN IO(VCC) IO(VPP) PD Topt Tstg -40 to 85 -55 to 125 Rating -0.3 to 6.0 -0.3 to 6.0 -0.3 to 6.0 -0.3 to 6.0 Topt=25°C Unit V V V V >1A Internal Limited >200m A Internal Limited °C °C [Note] Absolute maximum ratings are threshold limit values that must not be exceeded even for any moment under any conditions. More over, such values for any two or more items of the ratings must not be reached simultaneously. Operation above these absolute maximum ratings may cause degradation or fatal damage to the device. These mean stress ratings and do not necessarily imply functional operation below these limits. Rev....