Datasheet4U Logo Datasheet4U.com

RP104 - 150mA LDO REGULATOR

Datasheet Summary

Description

Pin No.

Tab is GND level.

(They are connected to the reverse side of this IC.) Do not connect to other wires or land patterns.

RP1

Features

  • Low Supply Current Typ. 1µA (Except the current through CE pull down circuit).
  • Standby Mode Typ. 0.1µA.
  • Low Dropout Voltage Typ. 0.28V (IOUT=150mA 2.5V Output type).
  • Low Temperature-Drift Coefficient of Output Voltage Typ. ±40ppm/°C.
  • Good Line RegulationTyp. 0.05%/V.
  • High Output Voltage Accuracy±1.0%.
  • Small Packages PLP1010-4, SOT-23-5, SC-82AB.
  • Output Voltage1.2V, 1.3V,1.5V, 1.8V, 1.85V, 1.9V, 2.0V, 2.5V, 2.6V,.

📥 Download Datasheet

Datasheet preview – RP104

Datasheet Details

Part number RP104
Manufacturer RICOH electronics
File Size 150.59 KB
Description 150mA LDO REGULATOR
Datasheet download datasheet RP104 Datasheet
Additional preview pages of the RP104 datasheet.
Other Datasheets by RICOH electronics

Full PDF Text Transcription

Click to expand full text
150mA LDO REGULATOR RP104 SERIES Preliminary OUTLINE The RP104 Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the RP104 Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment. The output voltage of these ICs is fixed with high accuracy.
Published: |