RP114K - 300mA LDO REGULATOR

This page provides the datasheet information for the RP114K, a member of the RP114x 300mA LDO REGULATOR family.

Product Overview

RICOH electronics

Part number	RP114K
Manufacturer	RICOH electronics
File Size	906.94 KB
Description	300mA LDO REGULATOR
Datasheet	RP114K Datasheet
Additional preview pages of the RP114K datasheet.

DFN(PLP)1010-4 Top View 43 Bottom View 34 ∗ 12 21

NO.

SOT-23-5 54 (mark side) 123 DFN(PLP)1010-4 Pin No 1 2 3 4 Symbol VOUT GND CE VDD Pin Description Output Pin Ground Pin Chip Enable Pin ("H" Active)

a minimum input voltage from 1.4V and the output voltage, which can be set from 0.8V to 3.6V (in 0.1V step). The output voltage of these ICs is internally fixed. These ICs perform with low dropout voltage due to built-in transistor with low ON resistance. Low supply current and a chip enable function prolong the battery life of each system. The ripple rejection, line transient response and load transient response of the RP114x Series are excellent, thus these ICs are very suitable for the power.

RP110K - 150mA Low Supply Current LDO REGULATOR (Nisshinbo)
RP110L - 150mA Low Supply Current LDO REGULATOR (Nisshinbo)
RP110N - 150mA Low Supply Current LDO REGULATOR (Nisshinbo)
RP110Q - 150mA Low Supply Current LDO REGULATOR (Nisshinbo)
RP111H - Good Transient Response Low Voltage 500mA LDO (Nisshinbo)
RP111L - Good Transient Response Low Voltage 500mA LDO (Nisshinbo)
RP111N - Good Transient Response Low Voltage 500mA LDO (Nisshinbo)
RP115H - Low On Resistance / Low Voltage 1Ch 500mA/ 1.0A Alternative LDO (Nisshinbo)
RP115L - Low On Resistance / Low Voltage 1Ch 500mA/ 1.0A Alternative LDO (Nisshinbo)
RP117K - Negative-voltage LDO Regulator (Nisshinbo)

Other Datasheets by RICOH electronics

Published: Nov 7, 2015 |