RP130N151B-TR-FE Datasheet PDF - RICOH LOW NOISE 150mA LDO REGULATOR Specs

RP130N151B-TR-FE - LOW NOISE 150mA LDO REGULATOR

This page provides the datasheet information for the RP130N151B-TR-FE, a member of the RP130x LOW NOISE 150mA LDO REGULATOR family.

Datasheet Summary

Description

∗) Tab is GND level.

Features

Supply Current Typ. 38μA.
Supply Current (Standby Mode) Typ. 0.1 μA.
Ripple Rejection Typ. 80dB (f=1kHz).
Input Voltage Range 1.7V to 6.5V.
Output Voltage Range 1.2V to 5.3V (0.1V steps) (For other voltages, please refer to MARK.

Datasheet Details

Part number	RP130N151B-TR-FE
Manufacturer	RICOH
File Size	518.81 KB
Description	LOW NOISE 150mA LDO REGULATOR
Datasheet	RP130N151B-TR-FE Datasheet
Additional preview pages of the RP130N151B-TR-FE datasheet.

📁 Similar Datasheet

RP130N - Low Noise 150mA LDO Regulator (Nisshinbo)

RP1308 - 433.92 MHz SAW Resonator (RF Monolithics)

RP130K - Low Noise 150mA LDO Regulator (Nisshinbo)

RP130L - Low Noise 150mA LDO Regulator (Nisshinbo)

RP130Q - Low Noise 150mA LDO Regulator (Nisshinbo)

RP1315 - Power Inductor (Sumida Corporation)

RP132H-Y - Low on Resistance / Low Voltage 1A LDO (Nisshinbo)

Full PDF Text Transcription

Click to expand full text

RP130x SERIES LOW NOISE 150mA LDO REGULATOR NO.EA-173-131031 OUTLINE The RP130x Series are CMOS-based positive voltage regulator ICs with high ripple rejection, low dropout voltage, high output voltage accuracy and extremely low supply current. Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, a short current limit circuit and a chip enable circuit. These ICs have an excellent low supply current performed by CMOS process, moreover they perform with low dropout voltage due to built-in low ON-resistance. A chip enable function prolongs the battery life. The input transient response, the load transient response and the ripple rejection have been improved in the RP130x Series compared with the conventional products.

Published: Jun 27, 2016 |