Datasheet4U Logo Datasheet4U.com

BD62210AEFV - DC Brush Motor Drivers

General Description

driver for 2 DC brush motors or 1 stepper motor.

PWM or PWM constant current control.

protection circuits in this IC.

Key Features

  • Single Power Supply Input (rated voltage of 36V).
  • Rated Output Current (peak): 1.0A(1.5A).
  • Low ON-Resistance DMOS Output.
  • Forward, Reverse, Brake, Open.
  • Power Save Function.
  • External PWM Control.
  • PWM Constant Current Control (current limit function).
  • Built-in Spike Noise Cancel Function (external noise filter is unnecessary).
  • Driver for 2 DC Brush Motor.
  • Driver for 1 Stepper motor.
  • FULL STEP, HALF STEP (d.

📥 Download Datasheet

Datasheet Details

Part number BD62210AEFV
Manufacturer ROHM
File Size 1.14 MB
Description DC Brush Motor Drivers
Datasheet download datasheet BD62210AEFV Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD620 PNP SILICON EPIBASE TRANSISTORS Siemens Semiconductor Group
BD6200CS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Pan Jit International
BD6200CT SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Pan Jit International
BD601 (BD6xx) Silicon Power Transistor ETC
BD605 (BD6xx) Silicon Power Transistor ETC

Other Datasheets by ROHM

Part Number Description
BD6221F DC Brush Motor Drivers
BD6221F H-bridge driver
BD6221HFP H-bridge driver
BD6220F DC Brush Motor Drivers
BD6220F H-bridge driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Driver IC for PPC High Performance, High Reliability 36V 2ch DC Brush Motor Drivers for PPC's etc. BD62210AEFV General Description BD62210AEFV is a built-in 2 channel H-bridge motor driver for 2 DC brush motors or 1 stepper motor. This driver can facilitate low power consumption by direct PWM or PWM constant current control. There are built in protection circuits in this IC. It is possible to output an abnormal detection signal for Wired-OR that notifies each protection circuit operation, which contributes to set high reliability. Features  Single Power Supply Input (rated voltage of 36V)  Rated Output Current (peak): 1.0A(1.