Datasheet4U Logo Datasheet4U.com

BD63730EFV - Voltage Stepping Motor Driver

Description

BD63730EFV is a low-power motor driver that drives load by PWM current.

Rated power supply voltage of the device is 36V, and rated output current is 3.0A.

Features

  • Rated output current of 3.0A DC.
  • Low ON-Resistance DMOS output.
  • CLK-IN drive mode.

📥 Download Datasheet

Datasheet Details

Part number BD63730EFV
Manufacturer ROHM
File Size 2.82 MB
Description Voltage Stepping Motor Driver
Datasheet download datasheet BD63730EFV Datasheet

📁 Similar Datasheet

  • BD637 - Silicon NPN Power Transistor (Inchange Semiconductor)
  • BD633 - Silicon NPN Power Transistor (INCHANGE)
  • BD634 - Silicon PNP Power Transistor (Inchange Semiconductor)
  • BD635 - Silicon NPN Power Transistor (Inchange Semiconductor)
  • BD636 - Silicon PNP Power Transistor (INCHANGE)
  • BD638 - Silicon PNP Power Transistor (Inchange Semiconductor)
  • BD601 - (BD6xx) Silicon Power Transistor (ETC)
  • BD605 - (BD6xx) Silicon Power Transistor (ETC)
  • BD606 - (BD6xx) Silicon Power Transistor (ETC)
  • BD607 - (BD6xx) Silicon Power Transistor (ETC)
Other Datasheets by ROHM
  • BD6373GW - 6-Channel System Lens Driver
  • BD6370GUL - 5-Channel System Lens Driver
  • BD63710AEFV - 36V High-performance High-reliability Withstand Voltage Stepping Motor Driver
  • BD63715AEFV - High-reliability Withstand Voltage Stepping Motor Driver
  • BD63720AEFV - High-reliability Withstand Voltage Stepping Motor Driver
  • BD63725BEFV - High-reliability Withstand Voltage Stepping Motor Driver
  • BD63740FM - High-reliability Withstand Voltage Stepping Motor Driver
  • BD6376GUL - Single H-Bridge Driver

Full PDF Text Transcription

Click to expand full text
36ViHigh-performanceiand High-reliability Withstand Voltage Stepping Motor Driver BD63730EFV General Description BD63730EFV is a low-power motor driver that drives load by PWM current. Rated power supply voltage of the device is 36V, and rated output current is 3.0A. The input interface are interchangeable between CLK-IN drive mode and the PARALLEL-IN drive mode, and excitation mode is corresponding to FULL STEP, HALF STEP (2 types), and QUARTER STEP modes via a built-in DAC. In terms of current decay, the FAST DECAY/SLOW DECAY ratio may be set without any limitation, and all available modes may be controlled in the most appropriate way. In addition, the power supply may be driven by one single system, which simplifies the design.
Published: |