Datasheet4U Logo Datasheet4U.com

BM2LB300FJ-C - 2ch Low-Side Switch

General Description

The BM2LB300FJ-C is an automotive 2ch low side switch IC, which has built-in overcurrent limiting circuit, thermal shutdown circuit, and overvoltage (active clamp) protection circuit.

Key Features

  • Built-in overcurrent limiting circuit(OCP).
  • Built-in thermal shutdown circuit(TSD).
  • Built-in active clamp circuit.
  • Direct control enabled from CMOS logic IC, etc.
  • On-state resistance RON=300mΩ(Typ) (when VIN5V, ID=0.5A, Tj25C).
  • Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip.
  • AEC-Q100 Qualified (Note1) (Note 1) Grade1 General.

📥 Download Datasheet

Datasheet Details

Part number BM2LB300FJ-C
Manufacturer ROHM
File Size 972.32 KB
Description 2ch Low-Side Switch
Datasheet download datasheet BM2LB300FJ-C Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Automotive IPD Series 2ch Low Side Switch IC BM2LB300FJ-C Features ■ Built-in overcurrent limiting circuit(OCP) ■ Built-in thermal shutdown circuit(TSD) ■ Built-in active clamp circuit ■ Direct control enabled from CMOS logic IC, etc. ■ On-state resistance RON=300mΩ(Typ) (when VIN5V, ID=0.5A, Tj25C) ■ Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip ■ AEC-Q100 Qualified (Note1) (Note 1) Grade1 General Description The BM2LB300FJ-C is an automotive 2ch low side switch IC, which has built-in overcurrent limiting circuit, thermal shutdown circuit, and overvoltage (active clamp) protection circuit.